Thirteen (13) years of experience in piping engineering work for oil and gas, chemical, petrochemical and power plant industries. The experience covers both onshore and offshore works for feasibility study, conceptual design, basic engineering, and detail design and administration of 3D CAD tools (PDMS, E3D, SP3D, PDS).
I have been involved and worked in overseas such as: Japan, Brazil and Malaysia.
Positions of Responsibility are Piping Engineer / PDMS Administrator in TechnipFMC. Experience in various position including: Piping Engineer, Piping Designer, PDMS administrator, E3D Administrator, SP3D Administrator.
Knowledge in international codes and standards like ASME, API, ASTM, Shell DEP.
Kuwait City MTP kit ((+919101817206)) Buy Abortion Pills Kuwait
Technip fmc cv_hoang cong quoc khanh
1. Confidentiality Class A - This document is TechnipFMC property and it is -together with the information it contains- confidential.
It shall not be used for any other purposes than those for which it was supplied and shall not be reproduced and/or
disclosed to any third party without TechnipFMC authorization. TechnipFMC All rights reserved.
Page 1 of 10
Rev. Date Originator Approved
21/06/19 HCQ Khanh KM Wong
Profile
Thirteen (13) years of experience in piping engineering work for oil and
gas, chemical, petrochemical and power plant industries. The
experience covers both onshore and offshore works for feasibility
study, conceptual design, basic engineering, and detail design and
administration of 3D CAD tools (PDMS, E3D, SP3D, PDS).
I have been involved and worked in overseas such as: Japan, Brazil
and Malaysia.
Positions of Responsibility are Piping Engineer / PDMS Administrator
in TechnipFMC. Experience in various position including: Piping
Engineer, Piping Designer, PDMS administrator, E3D Administrator,
SP3D Administrator.
Knowledge in international codes and standards like ASME, API,
ASTM, Shell DEP
Two (02) years in planning maintenance a machine and responsible for
maintenance all kinds of machines at plant.
Main projects
Highlight of major green field projects as lead engineer includes:
- The Al Shaheen Phase 2 Field Development Project for offshore
Qatar – Detailed Engineering
- CRD TLWP Subsea project – FEED and Detailed Engineering
- Dinh Co LPG project – Detailed Engineering
- Huntsman VIP project – FEED and Detailed Engineering
- Su Tu Trang Platfom project – Detailed Engineering
- Thien Ung BK-TNG Platform – FEED and Detailed Engineering
- Su Tu Nau Platfom project – Detailed Engineering
- ThangLong – DongDo – Detailed Engineering Design
- Rubby -B – Detail Engineering
- KNOC Extend Cooler– Detail Engineering
Education
Bachelor’s Degree in Machanical
Engineering, Ho Chi Minh City
University of Technical Eduacation
Professional Qualifications /
Registration
PDMS certificate - AVEVA
SP3D certificate - INTERGHAPH
ISO certificate
Certificate of Lean Six Sigma
101, 201 and 301 from
TechnipFMC University
Nationality
Vietnam
Languages
English, Good
Vietnamese, Fluent
Year of Birth
1981
Experience in Software
PDMS
E3D
SP3D
PDS
Autocad
Position : Piping Engineer / PDMS Administrator
Email: khanhhcq81@gmail.com
Phone: +84909316341
Hoang Cong Quoc Khanh
2. Confidentiality Class A - This document is TechnipFMC property and it is -together with the information it contains- confidential.
It shall not be used for any other purposes than those for which it was supplied and shall not be reproduced and/or
disclosed to any third party without TechnipFMC authorization. TechnipFMC All rights reserved.
Page 2 of 10
Rev. Date Originator Approved
21/06/19 HCQ Khanh KM Wong
Detailed background
Period Company Name Position Held
06/2010 – Present Technip Engineering (Vietnam) Ltd Piping Engineer / PDMS Administrator
05/2009 – 05/2010 Shinsei Vietnam Engineering Co.,Ltd Piping & PDMS Engineer
03/2008 – 04/2009 Toyo Engineering Corporation (Brasil) PDMS Designer
03/2006 – 02/2008 Cactus Engineering Co., Ltd PDMS Designer
05/2004 – 02/2006 United Packing Joint Stock Company Mechanical Engineer
Work history with TechnipFMC(since 2010)
11/2018 –
06/2019
Client: NORTH OIL COMPANY (NOC).
Project Title /
Description:
The Al Shaheen Phase 2 Field Development Project for offshore Qatar –
Detailed Engineering
Project Position: E3D Administrator
Responsibilities: Responsible for piping detail engineering package comprising of:
Software set up and configuration of full Aveva applications suite
Creation and setting up E3D Project and provide respective access
controls
Prepare Administration activities of 3D PDMS software database
management, Draft setup, Isodraft Setup, MDS setup and Catalogue
3D modeling of equipment, Design routing of pipe based on the P&ID
Prepare for the General Arrangement (GA) drawings
Prepare for piping weight control report
Customized E3D MDS (multi disciplinepipe support) system to suitproject
pipe supports standards
Prepared daily review model file (3D walk through) for client review
Interface between Structural BOCAD model with E3D model
04/2018 –
10/2018
Client: Japan Vietnam Petroleum Company (JVPC).
Project Title /
Description:
Whp-E1 Slot Extension Verification Engineering
Project Position: PDMS Administrator/ Piping Designer
Responsibilities: Responsible for piping detail engineering package comprising of:
Software set up and configuration of full Aveva applications suite
Creation and setting up PDMS Project and provide respective access
controls
Prepare Administration activities of 3D PDMS software database
management, Draft setup, Isodraft Setup, MDS setup and Catalogue
3D modeling of equipment, Design routing of pipe based on the P&ID
Prepare for the General Arrangement (GA) drawings
Prepare for piping weight control report
3. Confidentiality Class A - This document is TechnipFMC property and it is -together with the information it contains- confidential.
It shall not be used for any other purposes than those for which it was supplied and shall not be reproduced and/or
disclosed to any third party without TechnipFMC authorization. TechnipFMC All rights reserved.
Page 3 of 10
Rev. Date Originator Approved
21/06/19 HCQ Khanh KM Wong
Prepared daily review model file (3D walk through) for client review
Platform site survey & report
10/2017 –
03/2018
Client: Talisman Vietnam 07/03 B.V.
Project Title /
Description:
Ca Rong Do TLWP Project for:-
Suppy of flexible reisers, Pipelines & SSIV Skid
Project Position: PDMS Administrator/ Piping Designer
Responsibilities: Responsible for piping detail engineering package comprising of:
Software set up and configuration of full Aveva applications suite
Creation and setting up PDMS Project and provide respective access
controls
Prepare Administration activities of 3D PDMS software database
management, Draft setup, Isodraft Setup, MDS setup and Catalogue
3D modeling of equipment, Piping
Prepare for the General Arrangement (GA) drawings
Prepare for piping weight control report
Prepared daily review model file (3D walk through) for client review
Daily project back-up procedures and DICE and Datacon check
09/2016 –
09/2017
Client: PetroVietnam Gas (PVGAS).
Project Title /
Description:
Dinh Co LPG Project for:-
Enhanced LPG recovery project
Project Position: PDMS Administrator
Responsibilities: Responsible for piping detail engineering package comprising of:
Software set up and configuration of full Aveva applications suite
Creation and setting up PDMS Project and provide respective access
controls
Prepare Administration activities of 3D PDMS software database
management, Draft setup, Isodraft Setup, MDS setup and Catalogue
Customized MDS (multi discipline pipe support) system to suitprojectpipe
supports standards
Prepare the backing sheet drawing for Draft and Isometric drawing
extraction
Extract Material Take-Off Report, Bolt Summary Report
Prepare for the General Arrangement (GA) drawings
Prepared daily review model file (3D walk through) for client review
Daily project back-up procedures and DICE and Datacon check
02/2016 –
08/2016
Client: Huntsman (Singapore) Pte.Ltd.
Project Title /
Description:
Huntsman VIP Projectfor:-
P&ID of production and utilities
Steel structure for blender and reactor,civil for equipmentfoundationand
separation wall (door)
Equipment, Piping layout
Equiment, Piping specification
HVAC, dust collection system and local ventilation
Electric and MCC, instrumentation and control system
4. Confidentiality Class A - This document is TechnipFMC property and it is -together with the information it contains- confidential.
It shall not be used for any other purposes than those for which it was supplied and shall not be reproduced and/or
disclosed to any third party without TechnipFMC authorization. TechnipFMC All rights reserved.
Page 4 of 10
Rev. Date Originator Approved
21/06/19 HCQ Khanh KM Wong
Project Position: PDMS Administrator
Responsibilities: Responsible for piping detail engineering package comprising of:
Software set up and configuration of full Aveva applications suite
Creation and setting up PDMS Project and provide respective access
controls
Prepare Administration activities of 3D PDMS software database
management, Draft setup, Isodraft Setup, MDS setup and Catalogue
Customized MDS (multi discipline pipe support) system to suitprojectpipe
supports standards
Prepare the backing sheet drawing for Draft and Isometric drawing
extraction
Extract Material Take-Off Report, Bolt Summary Report
Prepare for the General Arrangement (GA) drawings
Prepared daily review model file (3D walk through) for client review
Daily project back-up procedures and DICE and Datacon check
03/2015 –
01/2016
Client: Cuu Long Joint Operating Company
Project Title /
Description:
Su Tu Trang full field development – phase 1
Detailed engineering and procurementengineering supportservices:-
Detail design for wellhead platform ST-PIP, Living quarter ST-LQ &
WHP-C
Project Position: PDMS Administrator
Responsibilities: Responsible for piping detail engineering package comprising of:
Software set up and configuration of full Aveva applications suite
Creation and setting up PDMS Project and provide respective access
controls
Coordinate with Project Engineer/Lead Engineer in the planning and
development of 3D PDMS engineering documents, engineering
schedules and monitoring of these document
Prepare Administration activities of 3D PDMS software database
management, Draft setup, Isodraft Setup, MDS setup and Catalogue
Prepared 3D Model Project Implementation Procedures and local work
instructions
Customized MDS (multi discipline pipe support) system to suitprojectpipe
supports standards
Import Structural BOCAD model into PDMS model
Prepare the backing sheet drawing for Draft and Isometric drawing
extraction
Perform clash checks and making line consistencyclear, generate clash
plot and reports
Extract Material Take-Off Report, Bolt Summary Report and also Centre
of Gravity (COG) reports
Prepare for the General Arrangement (GA) drawings
Prepared daily review model file (3D walk through) for client review
Daily project back-up procedures and DICE and Datacon check
04/2014 –
02/2015
Client: VIETSOPETRO Company
Project Title /
Description:
Detail Engineering Service for BK-TNG Wellhead Platform
Project Position: SP3D Administrator
5. Confidentiality Class A - This document is TechnipFMC property and it is -together with the information it contains- confidential.
It shall not be used for any other purposes than those for which it was supplied and shall not be reproduced and/or
disclosed to any third party without TechnipFMC authorization. TechnipFMC All rights reserved.
Page 5 of 10
Rev. Date Originator Approved
21/06/19 HCQ Khanh KM Wong
Responsibilities: Responsible for piping detail engineering package comprising of:
Overall 3D model management and quality assurances related to 3D
modeling by all disciplines
Managing permission groups and levels of access for the project
Focal Point for all disciplines related to 3D MODEL
Document scope of modeling by disciplines
Creation/maintenance/modifications of specifications and components in
the Catalogue Database
Flow of general information to and from designers/drafters and LD’s
Managing “To-do list” activities to check inconsistent data in 3D models
for every disciplines
Prepare the SPR review for client review
Batch generation and extraction of drawings and reports
Backup and archiving of S3D database
04/2013 –
04/2014
Client: Cuu Long Joint Operating Company
Project Title /
Description:
Su Tu Field Development – Su Tu Nau Wellhead Platforms and Pipelines
EPCI Contract
Project Position: PDMS Administrator
Responsibilities: Responsible for piping detail engineering package comprising of:
Software set up and configuration of full Aveva applications suite
Creation and setting up PDMS Project and provide respective access
controls
Coordinate with Project Engineer/Lead Engineer in the planning and
development of 3D PDMS engineering documents, engineering
schedules and monitoring of these document
Prepare Administration activities of 3D PDMS software database
management, Draft setup, Isodraft Setup, MDS setup and Catalogue
Prepared 3D Model Project Implementation Procedures and local work
instructions
Customized MDS (multi discipline pipe support) system to suitprojectpipe
supports standards
Import Structural TEKLA model into the PDMS model
Prepare the backing sheet drawing for Draft and Isometric drawing
extraction
Perform clash checks and making line consistencyclear, generate clash
plot and reports
Extract Material Take-Off Report, Bolt Summary Report and also Centre
of Gravity (COG) reports
Prepare for the General Arrangement (GA) drawings
Prepared daily review model file (3D walk through) for client review
Daily project back-up procedures and DICE and Datacon check
06/2012 –
03/2013
Client: Petronas Carigali Company
Project Title /
Description:
FEED and EPCIC of SK316 Development Project
Project Position: PDMS Administrator
Responsibilities: Responsible for piping engineering package comprising of:
6. Confidentiality Class A - This document is TechnipFMC property and it is -together with the information it contains- confidential.
It shall not be used for any other purposes than those for which it was supplied and shall not be reproduced and/or
disclosed to any third party without TechnipFMC authorization. TechnipFMC All rights reserved.
Page 6 of 10
Rev. Date Originator Approved
21/06/19 HCQ Khanh KM Wong
Prepare Administration activities of 3D PDMS software database
management, Draft setup, Isodraft Setup, and Catalogue
Import Structural BOCAD model into the PDMS model
Perform clash checks and making line consistencyclear, generate clash
plot and reports
Extract Material Take-Off Report, Bolt Summary Report and also Centre
of Gravity (COG) reports
Prepared daily review model file (3D walk through) for client review
Daily project back-up procedures and DICE and Datacon check
12/2011 –
05/2012
Client: LAMSON Join Operating Company
Project Title /
Description:
ThangLong – DongDo Detailed Engineering Design
Project Position: PDMS Administrator
Responsibilities: Responsible for piping detail engineering package comprising of:
Software set up and configuration of full Aveva applications suite
Creation and setting up PDMS Project and provide respective access
controls
Coordinate with Project Engineer/Lead Engineer in the planning and
development of 3D PDMS engineering documents, engineering
schedules and monitoring of these document
Prepare Administration activities of 3D PDMS software database
management, Draft setup, Isodraft Setup, MDS setup and Catalogue
Import Structural BOCAD model into the PDMS model
Prepare the backing sheet drawing for Draft and Isometric drawing
extraction
Perform clash checks and making line consistencyclear, generate clash
plot and reports
Extract Material Take-Off Report, Bolt Summary Report and also Centre
of Gravity (COG) reports
Prepare for the General Arrangement (GA) drawings
Prepared daily review model file (3D walk through) for client review
Daily project back-up procedures and DICE and Datacon check
02/2011 –
11/2011
Client: KNOC (Korea National Oil Corporation)
Project Title /
Description:
Detailed Engineering For Booster Compressor
Project Position: PDMS Administrator
Responsibilities: Responsible for piping detail engineering package comprising of:
Software set up and configuration of full Aveva applications suite
Creation and setting up PDMS Project and provide respective access
controls
Prepare Administration activities of 3D PDMS software database
management, Draft setup, Isodraft Setup, Catalogue
Prepare the backing sheet drawing for Draft and Isometric drawing
extraction
Perform clash checks and making line consistencyclear, generate clash
check report
Extract Material Take-Off Report, Bolt Summary Report and also Centre
of Gravity (COG) reports
7. Confidentiality Class A - This document is TechnipFMC property and it is -together with the information it contains- confidential.
It shall not be used for any other purposes than those for which it was supplied and shall not be reproduced and/or
disclosed to any third party without TechnipFMC authorization. TechnipFMC All rights reserved.
Page 7 of 10
Rev. Date Originator Approved
21/06/19 HCQ Khanh KM Wong
Prepare for the General Arrangement (GA) drawings
Prepared daily review model file (3D walk through) for client review
Daily project back-up procedures and DICE and Datacon check
03/2011 –
08/2011
Client: VIETSOPETRO Company
Project Title /
Description:
ThienUng FEED Project
Project Position: Piping Designer / Smart Plant Marine Administrator
Responsibilities: Responsible for piping detail engineering package comprising of:
Coordinate with Administrator in Technip Malaysia to prepare
Administration activities of Smart Plant Marine software database
management, Draft setup, Isodraft Setup, Spec and Catalogue
Design routing of pipe based on the P&ID
Select pipe supports and model support
3D modeling of equipment, nozzles orientation
Extract & check Isometric drawings
Extract Material Take-Off Report
Prepare for the General Arrangement (GA) drawings
03/2011 –
08/2011
Client: PCVL (PETRONAS VIETNAM)
Project Title /
Description:
RBDP-A Gaslift Upgrading Project
Project Position: Piping Designer / PDMS Administrator
Responsibilities: Responsible for piping detail engineering package comprising of:
Manage PDMS model database and PDMS user
Develop and manage PDMS Catalogue & Specifications
Update design database by migrate the previous model (Post AFC)
changes into current model
Prepare the backing sheet drawing for Draft and Isometric drawing
extraction
Design routing of pipe based on the P&ID, and Platform site survey
Perform clash checks and making line consistencyclear, generate clash
plot and reports
Extract & check Isometric drawings
Extract Material Take-Off Report, Bolt Summary
Prepare for the General Arrangement (GA) drawings
10/2010 –
02/2011
Client: PCVL (PETRONAS VIETNAM)
Project Title /
Description:
RBDP-B Gaslift Upgrading Project
Project Position: PDMS Administrator
Responsibilities: Responsible for piping detail engineering package comprising of:
Manage PDMS model database and PDMS user
Develop and manage PDMS Catalogue & Specifications
Update design database by migrate the previous model (Post AFC)
changes into current model
8. Confidentiality Class A - This document is TechnipFMC property and it is -together with the information it contains- confidential.
It shall not be used for any other purposes than those for which it was supplied and shall not be reproduced and/or
disclosed to any third party without TechnipFMC authorization. TechnipFMC All rights reserved.
Page 8 of 10
Rev. Date Originator Approved
21/06/19 HCQ Khanh KM Wong
Prepare the backing sheet drawing for Draft and Isometric drawing
extraction
Perform clash checks and making line consistencyclear, generate clash
plot and reports
Extract & check Isometric drawings
Extract Material Take-Off Report, Bolt Summary
Prepare for the General Arrangement (GA) drawings
Prepare the review (3D walk through) for client review
06/2010 –
10/2010
Client: KNOC (Korea National Oil Corporation)
Project Title /
Description:
Rong Doi Tay Field Development Project
Project Position: Piping Designer / PDMS Administrator
Responsibilities: Responsible for piping detail engineering package comprising of:
Manage PDMS model database and PDMS user
Develop and manage PDMS Catalogue & Specifications
Update design database by migrate the previous model (Post AFC)
changes into current model
Import Structural BOCAD model into PDMS model
Design routing of pipe based on the P&ID
Prepare the backing sheet drawing for Draft and Isometric drawing
extraction
Perform clash checks and making line consistencyclear, generate clash
plot and reports
Extract & check Isometric drawings
Extract Material Take-Off Report,BoltSummaryreportand also Centre of
Gravity (COG) reports
Prepare for the General Arrangement (GA) drawings
Prepare the review (3D walk through) for client review
Previous history
SHINSEI VIETNAM EMGINEERING CO., Ltd (05/2009 – 05/2010)
Piping & PDMS Engineer
05/2009 – 05/2010 Client: Shintech Louisiana
Project Title /
Description:
Hydrochloric Acid Production, LLC
Project Position: PDMS Piping design engineer
Responsibilities: Involved in PDMS design & drafting to modeling the 3D piping,equipment,
structure drawing
Design routing of pipe based on the P&ID
Select pipe supports and model support
Perform clash checks and making line consistencyclear, generate clash
plot and reports
Extract & check Isometric drawings
Extract & check General Arrangement (GA) drawings
Review Model such as Valve Operability, Maintainability, accessibility,
and constructibility by using the NAVISK WORK REVIEW Software
9. Confidentiality Class A - This document is TechnipFMC property and it is -together with the information it contains- confidential.
It shall not be used for any other purposes than those for which it was supplied and shall not be reproduced and/or
disclosed to any third party without TechnipFMC authorization. TechnipFMC All rights reserved.
Page 9 of 10
Rev. Date Originator Approved
21/06/19 HCQ Khanh KM Wong
TOYO ENGINEERING CORPORATION (BRASIL) (03/2008 – 04/2009)
PDMS Designer
03/2008 – 03/2009 Client: PETROBRAS – Petroleo Brasileiro S.A, Brazil
Project Title /
Description:
RVP (MODERNIZATION OF HENRIQUE LAGE REFINERY )
Project Position: PDMS Designer
Responsibilities: Involved in PDMS design & drafting to modeling the 3D piping,equipment,
structure drawing
Design routing of pipe based on the P&ID
Create and extract Spool drawings and Spool map drawings
Extract and check Isometric drawings, Unit plot plan
Preparing fabrication isometric drawings
Select pipe supports and model support
CACTUS ENGINEERING CO., Ltd (03/2006 – 02/2009)
PDMS Designer
06/2007 – 02/2008 Client: Nippon / Chiyoda Co.,
Project Title /
Description:
GTL (Gas to Liquid)
Project Position: PDMS Designer
Responsibilities: Involved in PDMS design & drafting to modeling the 3D piping,equipment,
structure drawing
Design routing of pipe based on the P&ID
Extract & check Isometric drawings, unit plot plan
Extract & check General Arrangement (GA) drawings
01/2007 – 05/2007 Client: Shintech Engineering Co.,
Project Title /
Description:
MA2 (Boiler Plant)
Project Position: PDMS Designer
Responsibilities: Involved in PDMS design & drafting to modeling the 3D piping,equipment,
structure drawing
Extract & check Isometric drawings
Extract & check General Arrangement (GA) drawings
Prepare report clash check
10/2006 – 12/2006 Client: Shintech Engineering Co.,
Project Title /
Description:
VCM2 (Vinyl Chlorride Monomer)
Project Position: PDMS Designer
10. Confidentiality Class A - This document is TechnipFMC property and it is -together with the information it contains- confidential.
It shall not be used for any other purposes than those for which it was supplied and shall not be reproduced and/or
disclosed to any third party without TechnipFMC authorization. TechnipFMC All rights reserved.
Page 10 of 10
Rev. Date Originator Approved
21/06/19 HCQ Khanh KM Wong
Responsibilities: Involved in PDMS design & drafting to modeling the 3D piping,equipment,
structure drawing
Extract & check Isometric drawings
Drafting of equipment layout, nozzle orientation
Extract & check General Arrangement (GA) drawings
Prepare report clash check
03/2006 – 08/2006 Client: Shinsei Giken Co.,
Project Title /
Description:
Piping training course (on the job training)
Project Position: Piping / PDMS Designer
Responsibilities: Learn PDMS software from Japanese senior
Learn the basics of piping and equipment components
Prepare Isometric drawings based on piping plans
To do various piping design around equipment
Understand P&ID and standards (ASME, ANSI…)
UNITED PACKING JOINT STOCK Co., (05/2004 – 02/2006)
Mechanical Engineer
05/2004 – 02/2006 Client:
Project Title /
Description:
Project Position: Mechanical Engineer
Responsibilities: Designing kinds of Moulds basing on customers’ need
Managing Moulds
Planning maintenance a machine and responsible for maintenance all
kinds of machines at plant
